Fornax ONE50

-No meridian flip / Recta and declination axeses can rotate 360 degrees
-Recta and declination axises built into one housing. The mount is very robust!
-Integrated controller hardver
-Integrated haidenhein 25 bit absolute encoders
-Telescopes also can be installed to the counterweight shaft, instedd off counterweights. In this case you can install even 4 telescopes!
-After switched on the mount you can start to use it instantly. You don’t need any reference stars.
-Closed loop control at the rekta axis (+-0,5 arcsec)

10490 Euros (Exc. VAT.) + shipping

INCLUDED:
Built in MC5 controller
Hand controller
Ursa Minor PRO software
Built in absolute encoders (Heidenhain 25 bit)

Wedge and oblique pier


To buy or get shipping rate please contact us with the Mail for quote button below:

 

10.490,00 (exc. VAT)

Mail for Quote

Fornax ONE50

-No meridian flip / Recta and declination axeses can rotate 360 degrees
-Recta and declination axises built into one housing. The mount is very robust!
-Integrated controller hardver
-Integrated Haidenhein 25 bit absolute encoders
-Telescopes also can be installed to the counterweight shaft, instedd off counterweights. In this case you can install even 4 telescopes!
-After switched on the mount you can start to use it instantly. You don’t need any reference stars.
-Closed loop control at the rekta axis (+-0,5 arcsec)

 

one50

 

SPECIFICATION OF FORNAX 100 EQUATORIAL MOUNT

Mount weight

About 30 kg

Max payload capacity:

50 kg or 80 kg (you can put telescope at the counterweight shatf)

Photographic payload:

40 kg (counterweight excluded)

Overall dimensions:

210 x 269 x 397 mm

Gear:

diameter 194mm, 1 modul, bronze, 192 teeth

Worm:

diameter 22mm, multiple thread, grinded, hardened, corrosion proof steel (KO13)

Periodic Error:

< +/- 0.5 arc seconds

Stepper Motors:

200-phase step / rev., 1.3 Nm

Voltage and Current:

12V DC, 3.5A peak power consumption at max. load

Step-resolution:

0.25 arc seconds / step with MC3 and 0,03  arc seconds / step with OC5

Maximum speed:

4 degrees / second

Counterweight holder shaft: diameter:

33.7mm (1,3267” KO33 tube) and length 470mm

 

 

Related Products